Starting tips for your motorcycle – Part 1

[HEADER: starthilfe-teil-1.]

Starting problems can have many causes. If your motorcycle refuses to start, the best thing is to do is to systematically pinpoint the source of the problem using the following "first aid" checklist.

12 reasons why motorcycles do not start

Kill switch set to "RUN"?

[IMAGE: kill switch.]

Kill switch set to "RUN"?

You'll find the kill switch on the right handlebar, generally marked "RUN" / "OFF". However, the majority of bikers virtually never use this alternative "emergency ignition on/off switch", so that they don't even think about it. And there are always a few jokers around who think it a great prank to switch it to "OFF" in passing. And more than a few bikes have been pushed to a workshop as a result!

Spark plug connectors secure?

[IMAGE: spark plug.]

Spark plug connectors secure?

A spark plug connector may also have come loose. We therefore check right away that all spark plug connectors on our engine are secure. Are the cables securely attached to the connectors and are the connectors securely seated on the spark plugs?

Dirty switch on the side stand?

[IMAGE: side stand.]

Switch on the side stand dirty?

The safety switch on the side stand is designed to prevent you riding off with the side stand down. It is fitted on the side stand bracket, and is therefore very exposed to moisture and dirt from the street. If it malfunctions, absolutely nothing will happen when the starter button is pressed. The first step would be to carry out a visual check. And even if the side stand appears to be correctly folded up, a millimetre of mud and dirt preventing the switch from reaching the correct position can make all the difference. If this proves to be the case, clean it with whatever you have at hand – a cloth/towel or a drop of penetrating oil or contact spray.

Neutral engaged?

[IMAGE: neutral engaged.]

Neutral engaged? Don't rely on your Neutral indicator!

Even when the indicator lights up, sometimes neutral is not actually engaged properly. On some bikes, this disconnects the ignition or starter control circuit, but on others the bike may jump forward if it is in gear and the starter is pressed. For safety, it is important to check briefly whether neutral really is engaged.

All energy guzzlers off?

[IMAGE: board equipment.]

All energy guzzlers off?

Some ignition systems are more than a little egoistic when it comes to battery power. Now, if the battery is not in peak condition, or if it is trying to supply other devices at the same time (lights, heated grips, etc.), this may mean that the ignition spark produced is not strong enough to start up a cold engine. So it's important to switch off all other devices during startup.

Ignition switch "contact problems"?

[IMAGE: ignition switch.]

Ignition switch contact problems?

Briefly switch on your headlights and check whether the light is weak or flickers when you jiggle the ignition key. If so, spray a little contact spray or penetrating oil into the lock. Generally, that will fix the problem – if not, you may need a new ignition switch.

Enough petrol in the tank?

[IMAGE: fuel tank cap.]

Enough petrol in the tank?

"I can hear splashing in the tank, so I'm bound to have enough fuel." Not necessarily! Most tanks have a tunnel-shaped recess in the middle designed to create space for frame tubes, air filter housing or other components. The fuel tap is on one side, and it is on this side of the tunnel that the fuel level may already be too low. You may hear petrol splashing around in the tank on the other side, but the tunnel prevents it getting across to the fuel tap side. Sometimes, by tipping the bike on its side (in the direction of the fuel tap – and don't forget that your bike's heavy!), you can shift the last drop of petrol over and use it to get you to the filling station.

Got there on your last gasp?

[IMAGE: petrol cock.]

Got there on your last gasp?

Sometimes it happens that you get to your destination literally with your last drop of fuel. And before the engine dies, you switch off the ignition. Made it! But when you try to start up next day, she's as dead as a dodo. Maybe a cough and a splutter, then silence. Simply switch to "reserve" if you have an (older) machine equipped with a handy fuel tap!

Choke fully functional?

[IMAGE: choke.]

Choke fully functional?

A cold engine can't start without the help of a cold start system. Especially if the choke is cable-actuated via the handlebar, it can jam or become stretched over time, so it no longer works. If there is reason to think this is the case, follow the cable from the handlebar back to the carburettor and check whether it's still working. If it is jammed, you will need to thoroughly lubricate the cable. Penetrating oil is often a quick solution to the problem. If the cable has stretched or is fraying, you will need to replace it.

Air bubble in the fuel filter? Kink in the fuel hose?

[IMAGE: fuel filter.]

Air bubble in the fuel filter? Kink in the fuel hose?

A large air bubble in an external fuel filter can certainly interrupt the flow of fuel to the carburettor. At the carburettor end, slightly loosen the hose at the filter while the fuel tap is open (if it is vacuum operated, set it to "PRI"). This will force the air through.Then quickly push the hose firmly back onto the filter so that you don't lose too much fuel. Always take care to avoid skin contact with fuel. A kink in the fuel hose may also stop the flow to your engine, so it is important to ensure the fuel hose isn't bent in too tight a radius. If that is not possible, it may help to feed the hose through a spiral spring.

Carburettor frozen?

[IMAGE: carburettor.]

Carburettor frozen?

The evaporation of fuel in the carburettor produces evaporative chilling and heat is drawn from the surroundings. Particularly when the weather is very humid and temperatures are only slightly above freezing, carburettors may occasionally freeze up – which will either prevent the engine from starting, or it will start but quickly die. This can be remedied by applying heat, and a fuel additive like Procycle Fuel System Cleaner can be used as a preventive measure.

Refuelled with diesel by mistake?

[IMAGE: diesel in the fuel tank.]

Refuelled with diesel by mistake?

"Would never happen to me!" But then again, if you were in a hurry? It's happened to the best of us. You're out and about, in a tearing rush, need some petrol and before you know where you are... Best do the smell test. And if it is diesel in your tank, you'll need to find another way of getting to your next appointment, because draining your tank and the carburettor float chambers is going to take a while.

And the same applies to a thorough inspection of your ignition and carburettor if this check list hasn't got you back up and running yet. Go to Part 2 of our handy tips for solving start-up problems …

Download this tip

[IMAGE: Download this tip.]

Simply download and use it offline.

[IMAGE - The Louis mechanics crew.]

The Louis Technical Centre

Problems getting spare parts? Or maybe you've got a technical question about your motorcycle or an accessory The Louis Technical Centre can help! Remember to quote all the necessary details of your vehicle – better still, send us a copy of your registration document.

We will get back to you as quickly as possible!

So: send us your technical problem!

Please note!

These tips for DIY mechanics contain general recommendations that may not apply to all vehicles or all individual components. As local conditions may vary considerably, we are unable to guarantee the correctness of information in these tips for DIY mechanics.

Thank you for your understanding.

German Version

Louis DIY Mechanic Manual

[IMAGE - Louis DIY Mechanic Manual.]

The printed version

The big Louis DIY mechanic manual available in a printed version: in color and practical A4 format at cost price.

Buy now!