mo.view street mirror glassless
mo.view street mirror glassless
motogadget has revolutionised the rearview mirror by developing the mo.view glassless mirror series. With this mirror series, the mirror surface is machined from solid aluminium using a special diamond grinding process. This achieves a "weightless" design without rim and holder. The mirror body itself becomes very thin and light as a result. The motogadget mo.view *street* bar-end mirrors are a good example.
The mo.view *street* bar-end mirrors are on the small side, appear diminished and go perfectly with many motogadget products. They are ultra-flat and distortion-free.
These mirrors can be mounted either above or below the handlebar. The short arms can be swivelled. The mirror is suitable for the right and left side.
They are mounted directly on the bar end (22 mm and 1 inch) or, if the handles and controls cannot be moved, using the mo.view *bar adapter*.
- Material: Anodised aluminium, CNC-machined
- Length of mirror stem: 60 mm
- Diameter of clamp: can be used for 22 mm and 1 inch handlebars
- Width of clamp: 10 mm
- Dimensions in mm (see dimensioned drawing): a=95, b=95, d=140.
mo.view *street* rearview mirror (with ECE mark) with arm clamp and instructions
Manufacturer details: motogadget
High Class Instruments & Accessories - MADE IN GERMANY
Anyone who is serious about customising cannot fail to appreciate the quality of motogadget products. In no time at all, the Berlin-based manufacturer has achieved virtually cult status with its high-class instruments. The reason is the exceptional functionality of motogadget products, but most importantly their extremely clean design, high-quality materials, top engineering and absolute reliability.
Modern vehicle accessories of different types now frequently carry an "E" approval mark valid throughout Europe. This "E" mark, which is made up of a combination of letters and numbers, is clearly displayed on the product and shows the application tested, the country in which testing was carried out and, where appropriate, the vehicle type to which approval applies. EC type approval for exhaust systems, for example, are always issued for a specific vehicle type, whereas in the case of lighting, they apply to an entire group of vehicles, e.g. motorcycles.
This certification mark is the sole proof of legality stipulated by law, i.e. no written report or entry in the vehicle documents by TÜV (German Technical Inspection Association) is required. However, when it comes to installing accessories, the relevant guidelines of the Road Traffic Licensing Regulations (StvZO) must always be observed.
At at a roadside check or a TÜV vehicle inspection, the registered keeper is only required to show the "E" mark. It is then up to the official in charge whether to check the mark with the Federal Motor Transport Authority (KBA) in Flensburg (or equivalent type approval authority in other countries), which is able to decode all certification marks.
Original parts on newer vehicles that have been given an "E" mark at the factory may only be replaced with accessories that have likewise undergone E-approval. An E-certified mirror may not, for example, by replaced with a mirror that only has TÜV approval under the German vehicle licensing regulations.
|MOTOGADGET MO.VIEW STREET - BAR-END MIRROR||10040860||
The item is in stock and will be delivered in 2-5 working days. Note: Stocks are updated online every hour on working days from 7 a.m. to 8 p.m., so there is a good chance that the products are available if they appear online.