LED FOG LIGHT FT13-FOG, E-APPROVED
LED FOG LIGHT FT13-FOG, E-APPROVED
A compact LED fog light with a very dynamic look, solid workmanship and high light output - that's the HIGHSIDER *FT13-FOG*. It has a round lens, its matt black housing is made of high-quality aluminium and the headlight is of course E-approved.
The LED technology and the insert used produce a symmetrical, bright light. The Highsider *FT 13-FOG* LED fog light fits perfectly with the HIGHSIDER *FT13-HIGH* (10049786) and *FT 13-LOW* (10049785) headlights. Ideal for conversions of any kind and STVO-compliant thanks to test mark. The unusual design and perfect technology of the HIGHSIDER headlight series also make the HIGHSIDER *FT-13* highlights and eye-catchers on your motorbike.
- Diameter: 55 mm
- Lens diameter: 44 mm
- Distance between mounting holes: 56 mm
- Lateral mounting holes: 63.8 mm
- Depth of housing: 70 mm
- Depth from mounting point: 62 mm
- Housing: Aluminium Material
- Holder: Steel
- red = low beam (+)
- black = ground (-)
Scope of delivery:
1 x Highsider *FT 13-FOG* LED fog light
1 x screw
1 x washer
1 x nut
Manufacturer details: Highsider
Headlights, turn signals, rearview mirrors and accessories
The German brand Highsider is most notably known for innovative lighting technology. Among other things, the Highsider range includes probably the smallest approved LED turn signal, combined turn signals/tail lights and LED headlights with low beam, high beam and parking light featuring state-of-the-art LED technology. Thanks to high-quality materials, meticulous workmanship and harmonious design, Highsider products provide the perfect individual finishing touch for all motorcycles. That also goes for the Highsider rearview mirror range. And best of all: Highsider products are incredibly reasonably priced in view of what they offer.
This product is made of high-quality CNC-machined aluminium and will look great on your motorbike.
To ensure that it gives you many years of service, please observe the following care instructions:
1. After installing the product, and each time you wash your motorbike, apply a wax-based care product, e.g. Procycle Polishing Wax, Order no. 10004923 for protection against wind and weather. You may need to repeat the application after an outing in winter weather, rain or salty air (near the coast).
2. Remove any corrosion as soon as possible using a standard aluminium polish (e.g. Autosol Aluminium Polish, Order no. 10004421).
Modern vehicle accessories of different types now frequently carry an "E" approval mark valid throughout Europe. This "E" mark, which is made up of a combination of letters and numbers, is clearly displayed on the product and shows the application tested, the country in which testing was carried out and, where appropriate, the vehicle type to which approval applies. EC type approval for exhaust systems, for example, are always issued for a specific vehicle type, whereas in the case of lighting, they apply to an entire group of vehicles, e.g. motorcycles.
This certification mark is the sole proof of legality stipulated by law, i.e. no written report or entry in the vehicle documents by TÜV (German Technical Inspection Association) is required. However, when it comes to installing accessories, the relevant guidelines of the Road Traffic Licensing Regulations (StvZO) must always be observed.
At at a roadside check or a TÜV vehicle inspection, the registered keeper is only required to show the "E" mark. It is then up to the official in charge whether to check the mark with the Federal Motor Transport Authority (KBA) in Flensburg (or equivalent type approval authority in other countries), which is able to decode all certification marks.
Original parts on newer vehicles that have been given an "E" mark at the factory may only be replaced with accessories that have likewise undergone E-approval. An E-certified mirror may not, for example, by replaced with a mirror that only has TÜV approval under the German vehicle licensing regulations.
|LED FOG LIGHT - FT13-FOG, E-APPROVED||10049787||
The item is in stock and will be delivered in 2-5 working days. Note: Stocks are updated online every hour on working days from 7 a.m. to 8 p.m., so there is a good chance that the products are available if they appear online.