CTEK Lithium XS Battery Charger
Manufacturer details: CTEK
Professional battery care
Flat battery? Help is on the way, care of CTEK, a leading developer of highly efficient battery chargers for motorbikes and other vehicles. By using patented technology, battery chargers from CTEK don't just fulfill the increasing charging needs of modern batteries; they condition and maintain them too. In this way, their life expectancy is raised, and the user saves money. Safety, simplicity and flexibility are the key words here, which apply to all of the products and solutions developed by CTEK.
Catalogue page: 675
CTEK Lithium XS Battery Charger
CTEK battery charger LITHIUM XS
The LITHIUM XS is an advanced microprocessor controlled charger specially designed to recharge and maintain Lithium-Ion Phosphate (LiFePO4) batteries maximising their performance and lifespan. With up to 5A of charge current available the LITHIUM XS is extremely flexible and will charge LiFePO4 batteries from 5Ah to 60Ah and maintain up to 120Ah.
Operation is simple and charging will commence upon connection. With no need to disconnect the battery from the vehicle, at charge start the LITHIUM XS will automatically reset any low voltage protection electronics (Battery Management System) fitted. Charging can be restarted manually at any time using the "Reset" button.
The LITHIUM XS is a fully automatic "connect and forget" charger with 8 charging steps including a testing sequence to show if the LiFePO4 battery can take and retain charge, a unique maximisation step to restore full capacity, and patented maintenance charging to ensure maximum performance even after months of inactivity. Splash proof and dust proof (IP65) the LITHIUM XS is easy and safe to use, protects vehicle electronics, spark-free, reverse polarity protected and short circuit proof.
- current: max. 5.0 A
- Splashproof and dustproof (IP65)
- Reverse polarity and short-circuit
- Operating voltage : 220-240V - Working
- temperature range: -20°C to +50°C
- Dimensions: (WxHxD) approx. 16.8 x 3.8 x 6.5 cm
- CTEK LITHIUM XS Charger
- Cable set with clip connectors for quick connection
- Cable set with ring terminals (M6) for permanent connection to the battery
- Multilingual operating instructions
Attention: The LITHIUM XS charger model is designed for Lithium-ion batteries using LiFePO4 technology only!
CTEK Lithium XS Battery ChargerCompare product
Product details Suitable to starter batteries with 12V Charging current (max.) 5.000 mA Charging characteristic IUoUp Number of LED status indicators 10 LED´s Special Features - Overview of product features Suitable for conventional lead acid batteries – Suitable for maintenance-free gel batteries – Suitable for maintenance-free AGM batteries – Suitable for pure lead batteries – Suitable for 12V Lithium-Ion starter batteries CAN bus compatible – Intelligent charging technology Short-circuit proof Automatic charging current adaptation Automatic charging shutdown Reactivation of deeply discharged batteries – Trickle charging Desulphation function – Automatic battery test before charging
Test reportsIssue 3-2013
"Circuit" magazine tested the CTEK LITHIUM XS charger in its 3-2013 issue and rated it "HIGHLY RECOMMENDED". The following features were given special mention:
- Maximises the performance of lithium-ion batteries, unlike conventional chargers
- Well engineered
- Extremely simple to use
- Compact and handy, long cable
- Splashproof and dust-tight
- Short-circuit-proof and reverse polarity protected