- Home
- Add-On Parts
- Mirrors
- Bar-end Mirror
- Bar-End Mirror Montana-Blast
Highsider
HIGHSIDER BAR-END MIRROR
MONTANA BLAST, BLACK,LONG
Art. No. 10062101
Important notes
RRP
€54.95 2
€44.95 1
You have placed the following items in the shopping basket:
Description
HIGHSIDER BAR-END MIRROR MONTANA BLAST, BLACK,LONG
One thing is certain: bar-end mirrors give your motorcycle a rather special look. OEM mirrors are often not that spectacular, so it's hardly surprising you'll want to improve on them. HIGHSIDER is only too pleased to help with its range of bar-end mirrors, which give you some really fun solutions for your bike. Take the bar-end mirrors from the HIGHSIDER *MONTANA BLAST* series, for example. High-quality materials, perfectly engineered. These are the ingredients used by HIGHSIDER to make motorcycle dreams come true. The *MONTANA BLAST* bar-end mirror is made of elegant, matt-black anodised aluminium with a finely bead-blasted finish. These motorcycle rearview mirrors are suitable for 7/8-inch (22.2 mm) and 1-inch (25.4 mm) handlebars. Each mirror can be mounted on the right or left, and also over or under the handlebar. *MONTANA BLAST* mirrors are E-approved and can be mounted directly on the handlebar with the reducer sleeves (included), or on optionally available bar ends with bar-end mirror mount.
Features:
- Material: anodised aluminium
- Suitable for 7/8 and 1-inch handlebars (diam. 22/25.4 mm)
- E-approved
- Can be mounted left or right
- Head: diam. 102 mm
- Overall height: 195 mm
- Mirror stem length: 70 mm from head to bend and 115 mm to end of clamp
- Weight: 208 g
In the box:
1 mirror
Manufacturer details: Highsider
Headlights, turn signals, rearview mirrors and accessories
The German brand Highsider is most notably known for innovative lighting technology. Among other things, the Highsider range includes probably the smallest approved LED turn signal, combined turn signals/tail lights and LED headlights with low beam, high beam and parking light featuring state-of-the-art LED technology. Thanks to high-quality materials, meticulous workmanship and harmonious design, Highsider products provide the perfect individual finishing touch for all motorcycles. That also goes for the Highsider rearview mirror range. And best of all: Highsider products are incredibly reasonably priced in view of what they offer.
Info
This product is made of high-quality aluminium and will look great on your motorbike. To ensure that it gives you years of pleasure, please observe the following instructions: To keep this product in top condition, it should be treated after long trips in winter, or in rain or salty air (near the coast), and also at periodic intervals.
Water and salt encourage corrosion. After cleaning (e.g. with Procycle Special Gel Cleaner, Order no. 10004909), we recommend regularly polishing aluminium parts with standard aluminium polish (e.g. Alu-Magic, Order no. 10004031).
Info
Dimension sketch mirror
Info
Modern vehicle accessories of different types now frequently carry an "E" approval mark valid throughout Europe. This "E" mark, which is made up of a combination of letters and numbers, is clearly displayed on the product and shows the application tested, the country in which testing was carried out and, where appropriate, the vehicle type to which approval applies. EC type approval for exhaust systems, for example, are always issued for a specific vehicle type, whereas in the case of lighting, they apply to an entire group of vehicles, e.g. motorcycles.
This certification mark is the sole proof of legality stipulated by law, i.e. no written report or entry in the vehicle documents by TÜV (German Technical Inspection Association) is required. However, when it comes to installing accessories, the relevant guidelines of the Road Traffic Licensing Regulations (StvZO) must always be observed.
At at a roadside check or a TÜV vehicle inspection, the registered keeper is only required to show the "E" mark. It is then up to the official in charge whether to check the mark with the Federal Motor Transport Authority (KBA) in Flensburg (or equivalent type approval authority in other countries), which is able to decode all certification marks.
Original parts on newer vehicles that have been given an "E" mark at the factory may only be replaced with accessories that have likewise undergone E-approval. An E-certified mirror may not, for example, by replaced with a mirror that only has TÜV approval under the German vehicle licensing regulations.
Documents
Reviews
Write a review for HIGHSIDER BAR-END MIRROR
Terms of use
We offer you the opportunity to rate products purchased from Louis and to share your experiences with them publicly.
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
- Please only rate products that you have personally used for their intended purpose.
- Please give reasons for your positive and negative criticisms. Only then will they benefit other customers and allow us to improve the product if necessary.
- Please don’t copy content that has already been published elsewhere. It’s your personal experience which counts.
- Data protection: Please don’t include your own and other people’s addresses, telephone numbers or URLs or even the names of third parties (people as well as companies) in your review.
- In your product review, please don’t make comparisons with third party product ranges. Regardless of whether you judge these positively or negatively, you, or we as operators of this online shop, would be violating competition law.
Fair play: Please follow these rules so that we don’t have to shorten or delete your rating.
Many thanks!
Your product rating has been saved. It will be displayed in a few minutes
Your previous input will be lost!
Do you really want to cancel your entry?
All versions
Any questions?
+400 brands
2-year right of return
Fast delivery
Worldwide shipping