Akron-RS universal number plate holder Reflektor e-approved, black

Akron-RS universal number plate holder Reflektor e-approved, black

Finding a special licence plate holder that fits your motorbike exactly can take time. However, it is much quicker to try a universal HIGHSIDER licence plate holder such as the *AKRON-RS universal*. Among the many different versions available, there is bound to be one that fits your bike.
All in all, these holders are slim and very attractive. The HIGHSIDER *AKRON-RS universal* number plate holders are very robust and have a weather-resistant black powder coating. Their licence plate is made of 2 mm thick sheet steel. The holder plates are available in eight variants.

The infinitely variable adjustment allows you to set the plate and thus your number plate in the desired position without drilling. An additional locking screw ensures that everything remains in the position you have chosen. To prevent damage to cables, all sharp-edged feed-throughs are protected by a rubber membrane grommet.
The width of the HIGHSIDER *AKRON-RS universal* indicator brackets is adjustable and therefore suitable for all types of accessory turn signals. This adjustment option allows you to adapt the position of your turn signals to the most varied number plates. The 10 mm holes are slotted to the side to allow the indicators to be mounted without disconnecting them from the wiring harness. You can also adjust the position of the rear reflector individually using a slider. Adaptation to the different designs of EU number plates is therefore no problem. Two rubber washers are included to securely screw the number plate and reduce vibrations. Another rubber buffer supports the licence plate on its underside.

Details:

• Bracket available in many different versions
• Steplessly adjustable indicator holder
• slotted indicator holder for easy mounting without cable separation
• Continuously adjustable reflector, E-approved
• suitable for European number plates
• infinitely adjustable angle of inclination
• Additional screw for optimum positional security
• Quick fixing without further work steps (e.g. drilling)
• Easy mounting of the number plate due to slotted holes

• for the original turn signals, special indicator holders are optionally available as accessories.
• if side reflectors are fitted to your original number plate holder, these must be refitted in a suitable position or replaced with new ones.
• there are eight retaining plates (type 1-8). Please use the dimensioned sketches (see documents) to determine which one fits your vehicle in comparison to the retaining plate.